Make a Clean Sweep
Key Features:
Your Purchase Includes:
Free Shipping*
Australian Product Lifetime Support
Australian Stock & Warranty
30 Day Satisfaction Guarantee
Access to In-Store DJI Workshops
AUD $1,499.00
$1,599.00
The DJI Romo S delivers powerful 25,000 Pa suction, LiDAR precision, and a fully automated self-cleaning base station — everything you need for effortless, thorough home cleaning.
The DJI Romo S proves that exceptional cleaning doesn't need to be complicated. Featuring the same 25,000 Pa suction motor shared across the entire Romo lineup, it effortlessly lifts embedded dirt, pet hair, and fine dust from every surface.
Its built-in 164mL active water tank keeps the dual mop pads perfectly saturated for a consistent, streak-free mop across all your hard floors. Paired with solid-state LiDAR, it maps and cleans your home with precision and reliability.
Say goodbye to dry mop pads. The integrated water reservoir actively hydrates the spinning pads, ensuring a consistent, deep clean across all your hard surfaces.
Powered by advanced fisheye cameras and precise LiDAR technology, the robot seamlessly navigates around furniture, toys, and cables, day or night.
Get back to cleaning faster. The high-speed 55W charging system significantly reduces downtime, keeping your Romo S powered up when you need it most.
The roller brushes deliver powerful performance for effortless long hair and large particle pickup, with an anti-tangle design that keeps maintenance to a minimum.
The DJI Romo S utilizes cutting-edge spatial awareness, combining binocular fisheye lenses with wide-angle solid-state LiDAR. This allows it to rapidly map complex floor plans and avoid obstacles with millimeter-level accuracy.
From navigating under low-profile couches to cleaning along tight baseboards, the robot dynamically adjusts its route in real time. Enjoy a thorough, edge-to-edge clean without worrying about it getting tangled or trapped.
Ditch the manual washing. The all-in-one base station blasts the mop pads with a high-pressure water jet, ensuring a fresh, hygienic start for every single cleaning session.
The Romo S keeps itself clean and ready. It automatically dispenses cleaning solution and uses hot air to dry the dust compartment after each session, so you don't have to worry about maintenance.
The Romo S utilises twin high-torque motors to effortlessly sweep debris towards its central suction system. Reach deep into corners with extendable robotic arms that ensure no spot gets missed.
Whether it's a tight baseboard or a hard-to-reach corner, the Romo S's intelligent arm mechanism extends on demand, delivering comprehensive edge-to-edge coverage throughout your entire home.
Romo S intelligently controls water output depending on floor material, delivering the right amount of moisture for hard floors while protecting delicate surfaces.
The station actively circulates hot air through the robot's dust compartment, maintaining a hygienic, moisture-free environment.
Engineered with advanced acoustic dampening, the automatic dust collection cycle is significantly quieter than standard vacuums.
Manage your clean from anywhere. Use the intuitive companion app to set no-go zones, schedule routines, and track progress.



| Model | CR8F |
| Dimensions | 351×351×98 mm |
| Weight | 4.4 kg |
| Appearance | White |
| Suction Power | 25000 Pa |
| Dustbin Capacity | 260 ml |
| Battery | Capacity: 5,000 mAh Energy: 72 Wh |
| Rated Voltage | 14.4 V |
| Rated Input | 20 V |
| Runtime | 3 hours Measured at 77°F (25°C) room temperature during vacuum-only operation in Quiet Mode, from 100% to 12% battery. Actual experience may vary depending on the environment, usage, and firmware version. |
| Charging Power | 55 W |
| Wi-Fi Transmitter Power (EIRP) | 2.4000 GHz to 2.4835 GHz:
< 20 dBm (CE) 5.150 GHz to 5.350 GHz: < 23 dBm (CE) 5.470 GHz to 5.725 GHz: < 23 dBm (CE) 5.725 GHz to 5.835 GHz: < 14 dBm (CE) Operating frequency allowed varies among countries and regions. Refer to local laws and regulations for more information. |
| Wi-Fi Protocol | 802.11b/g/n, 802.11a/n/ac |
| Bluetooth Protocol | Bluetooth 5.0 |
| Bluetooth Transmitter Power (EIRP) | 2.4000-2.4835 GHz: <10 dBm |
| Charging Time | 2.5 hours Measured in laboratory conditions at 77°F (25°C) room temperature. Charging time from 0% to 100% with robot in base station and drying function turned off. Actual experience may vary depending on the environment, usage, and firmware version. |