Designed for M300 Series
Key Features:The Zenmuse H20T is a unique hybrid all in one solution that defines mission efficiency. Combing a 20 MP Zoom Camera, 12MP Wide Camera, 1200m Laser Rangefinder and a 640 x 512px Radiometric Thermal Camera into a 3 axis gimbal has turned the DJI Matrice 300 RTK into the best enterprise and industrial drone on the market. With the new intelligent features and the utilising the power of AI, the Zenmuse H20T is THE payload to get with the Matrice 300 RTK.
▪ 23x Hybrid Optical Zoom and 200x Maximum Zoom.
▪ 20 MP Zoom Camera and 12 MP Wide Angle Camera.
▪ Up to 1200m range for the Laser Rangefinder.
▪ 640 x 512 at 30 fps are the specifications of the thermal camera.
A new integrated user interface lets you quickly switch between wide, zoom, and thermal camera views, and preview the zoom FOV while in wide or thermal camera view.
AI Spot-Check
Automate routine inspections and capture consistent results every time. Onboard AI recognizes the pre-marked subject of interest in subsequent automated missions to ensure consistent framing.
High-Res Grid Photo
Frame an area of interest in wide camera view, and the zoom camera will automatically capture a set of 20 MP images of the area. These images are stored together with an overview image that can be viewed in greater detail.
PinPoint
A quick tap marks an object in view, advanced sensor fusion algorithms immediately deliver its coordinates.
Smart Track
Identify and follow moving subjects like people, vehicles, and boats with the auto-zoom function, while continuously acquiring the subject’s dynamic location.
Accurate Temperature Measurement
Monitor the temperature of a site or an asset to eliminate any risks by acquiring a precise temperature reading from the air.
Spot Meter
Tap a point to get real-time reading of surface temperature.
Area Measurement
Select an area to view the lowest, highest and average temperatures.
Temp Alarm
Receive instant notifications in DJI Pilot when object temperatures exceed your preset alert values.
Isotherms
Visualize a specific band of temperatures to find what is important.
Color Palettes
Adjust the colors applied to the thermal data based on the needs of specific scenarios.
General FAQ
What is the ingress protection level?
Under controlled laboratory conditions, the Zenmuse H20 Series meets the IP44 protection level under the IEC60529 standard. The protection level is not permanently effective, and will weaken with wear and tear.
• Make sure the gimbal connector interface and gimbal surface are dry and free of moisture before installing the gimbal.
• Before use, make sure that the gimbal is firmly installed onto the aircraft, and the SD card cover is clean, free of foreign objects, and securely closed.
• Before opening the SD card cover, wipe the surface of the body clean.
What are the image resolutions of the cameras?
Radiometric thermal camera: R-JPEG, 640×512 px
Wide-angle camera: JPEG, 4056×3040 px
Zoom camera: JPEG, 5184×3888 px
What are the video resolutions of the cameras?
Radiometric thermal camera: 640×512@30fps
Wide-angle camera:1920×1080@30fps
Zoom camera: 3840×2160@30fps / 1920×1080@30fps
What are the zoom levels of the H20T?
23× hybrid optical zoom, 200× max zoom
Sensor + Functions
What is the minimum focusing distance of the RGB cameras?
The higher the zoom factor, the longer the focusing distance.
1×-2.8×, the minimum focusing distance is 1 m.
2.9×-3.9×, the minimum focusing distance is 2 m.
4×-4.6×, the minimum focusing distance is 3 m.
4.7×-14.2×, the minimum focusing distance is 5 m.
14.3×-200×, the minimum focusing distance is 8 m.
If the object is within the minimum focusing distance, the camera will not be able to focus. For example, if the aircraft/payload is 5 m away from a pylon, the camera will not be able to focus at a zoom level greater than 14.2×.
What factors affect the accuracy of the rangefinder?
Laser rangefinders measure distance using the time of flight of light. Their accuracy could be affected in environments where this ToF is affected: The range will be reduced in smoke, rain, snow, dust, and other environments, and data readings may be jumbled.
When measuring an object with glass or transparent components:
If the glass is within moderate distance, the distance to the glass will be measured (not the object behind the glass)
The glass may reflect the laser beam to other locations, resulting in the distance to other locations.
If the surface of the glass is very smooth or too close, the light will pass through the glass to detect the objects behind, but the range will be significantly reduced.
What is the accuracy of temperature measurements of the H20T?
The accuracy is ±2 °C or ±2%, whichever is greater. (Measured at 25 °C in a windless laboratory, 5 m away from the black body).
Note: black bodies have different emissivity levels, the measurement above is is based on the particular black body measured and for reference only.
What factors affect the temperature measurement of the Zenmuse H20T?
The reflectivity of objects: shiny metals have higher reflectivity will result in lower accuracy and lower temperature readings.
The temperature of background radiation: a clear, sunny day will have less of an effect on accuracy than a cloudy day.
Air temperature and humidity: the higher the temperature and humidity, the more likely the readings will be affected, and the lower the accuracy.
Distance between the camera and the object: the farther away the object is from the camera, the lower the accuracy.
Does the thermal camera in the H20T support digial zoom?
Yes. It supports 2×, 4×, and 8× digital zoom.
How many different ways can I measure temperature using the Zenmuse H20T?
There are two ways: Spot Meter for measuring a single position, and Area Measurement for getting different readings in an area.
Intelligent Functions
What is Night Scene Mode?
In Night Scene Mode, the camera will switch the IR filter and adjust the ISP parameters to optimize for lowlight environments.
What is High-Res Grid Photo Mode?
In DJI Pilot, by dragging to select an area in wide camera view, an image will be taken using the wide-angle camera while the gimbal rotates to automatically capture a series of photos at 20 MP of the selected area using the zoom camera at the current zoom level. All of the images captured will be stored in the same sub-folder on the SD card, generating an HTML file that can be opened in a web browser to view the overview image and the detailed close-up images.
What is the maximum Micro SD Capacity supported?
128 GB. We recommend using a UHS-I Speed Grade 3 Micro SD card.
Are timed photos supported?
Yes, they are now.
